Ngwa ngwa ike ndị ọzọ

  • Soft Temper Bare Copper Conductor

    Onye na-eduzi iwe ọkụ dị nro

    Ụdị:
    16 mm2/25 mm2

    Nchịkọta:
    Emepụtara na-agbaso ụkpụrụ NTP 370.259, NTP 370.251, NTP IEC 60228 chọrọ.Ezubere ka etinye ya na sistemu mgbada n'ime ebe mgbanwe, ahịrị nnyefe ike, ahịrị nkesa nke izizi na netwọkụ, netwọkụ nkesa nke abụọ na ngalaba nkesa.Ha nwere ike iguzogide ọnọdụ ihu igwe na-adịghị mma na ọnụnọ nke ikuku oké osimiri na ihe ndị na-emepụta kemịkalụ na mpaghara ụlọ ọrụ mmepụta ihe, na-ekpughere oke ọkụ na ọnọdụ oyi.

  • Medium Voltage Copper Cable

    Ọkara voltaji ọla kọpa USB

    Tibe:
    N2XSY (OTU-POLE)

    Nchịkọta:
    Emepụtara dị ka ụkpụrụ NTP IEC 60502-2, NTP IEC 60228. Ezubere ka arụnyere na ọkara voltaji nkesa netwọk, n'èzí na doro oghom ọnọdụ gburugburu ebe obibi dị ka mmetọ site chemical ọcha na ulo oru ebe na ọnụnọ nke ikuku oké osimiri, yana oke ọkụ na ọnọdụ oyi.

  • Self-Supporting Aluminum Cable

    Igwe eriri Aluminom na-akwado onwe

    Ụdị:
    Caai (Aluminom Alloy Na-anọpụ iche)

    Nchịkọta:
    Ezubere ka etinye ya na netwọk nkesa n'elu ime obodo na ime obodo.Polyethylene XLPE jikọtara cross na-enye ohere ka mma ugbu a na nguzogide mkpuchi.Aluminom Cables na-akwado onwe ya Ụdị CAAI (Aluminum Alloy Insulated Neutral) na voltaji Uo / U = 0.6 / 1kV na-arụ ọrụ dịka ụkpụrụ NTP370.254 / NTP IEC60228 / NTP370.258, IEC 60104 si dị.

  • Corrosion Resistance Aluminum Alloy Conductor

    Aluminom Alloy Conductor na-eguzogide corrosion

    Tibe:
    AAAC

    Nchịkọta:
    Eji ọtụtụ n'ígwé nke aluminum alloy wires.Bara uru maka elu mmetọ n'ụsọ oké osimiri na ụlọ ọrụ mmepụta ihe n'ihi na ya iguzogide corrosion.Widely eji na n'elu Lines.They nwere ezi corrosion eguzogide, ala arọ tụnyere ọla kọpa cables, ogologo ndụ na ala mmezi.They nwere ezi Breaking Load-Arọ ruru.

  • Silver Electrolytic Copper Expulsion Fuse

    Ọlaịja Electrolytic ọla kọpa achụpụ fuse

    Ụdị:
    27kV/100A, 38kV/100A, 27kV/200A

    Nchịkọta:
    A na-eji ya n'ahịrị nkesa ọkụ eletrik dị n'elu iji nye nchebe na-agafe agafe na ihe ngosi mgbe mmejọ mere.Zute ihe achọrọ nke ANSI / IEEE C37.40/41/42 na IEC60282-2: 2008.A na-akwadebe ihe mkpofu fuse nke anyị na-enye ka etinyere na mkpanaka nke netwọk voltaji nke usoro nkesa ọkụ eletrik.A na-akwado ha maka usoro nchịkwa na-aga n'ihu, na-eguzogide nrụgide okpomọkụ, ike ike na eletriki nke obere sekit na n'elu voltaji na-akpata, yana iji belata mmiri ozuzo dị mkpirikpi nke ọma, site na nke kacha nta na-agbaze ugbu a ruo na kachasị nke nwere ike ịpụta na nke kachasị njọ. ikpe n'okpuru ọnọdụ akọwapụtara

  • Pin Type Porcelain Insulator ANSI 56-3

    Ntụtụ Ụdị Porcelain Insulator ANSI 56-3

    Ụdị:
    ANSI 56-3

    Nchịkọta:
    ANSI klaasị 56-3 A na-eji mkpuchi ihe mkpuchi poselin na ahịrị nkesa voltaji na mpaghara nkesa n'elu.Emebere ha ka ha nagide ọnọdụ gburugburu ebe obibi ọjọọ dị ka ikuku oké osimiri na ihe kemịkal dị na mpaghara ụlọ ọrụ mmepụta ihe.
    Ha na-anagide nrụgide okpomọkụ, ike ike na eletriki nke sitere na sekit dị mkpirikpi enwere ike, voltaji na-arụ ọrụ na n'elu voltaji.

  • Pin Type Porcelain Insulator ANSI 56-2

    Ntụtụ Ụdị Porcelain Insulator ANSI 56-2

    Ụdị:
    ANSI 56-2

    Nchịkọta:
    ANSI Klas 56-2 A na-eji mkpuchi mkpuchi poselin na ahịrị nkesa voltaji na mpaghara nkesa n'elu.Emebere ha ka ha nagide ọnọdụ gburugburu ebe obibi ọjọọ dị ka ikuku oké osimiri na ihe kemịkal dị na mpaghara ụlọ ọrụ mmepụta ihe.
    Ha na-anagide nrụgide okpomọkụ, ike ike na eletriki nke sitere na sekit dị mkpirikpi enwere ike, voltaji na-arụ ọrụ na n'elu voltaji.

  • Suspension Type Porcelain Insulator

    Ụdị nkwusioru Insulator Porcelain

    Ụdị:
    ANSI 52-3

    Nchịkọta:
    ANSI klaasị 52-3 A na-eji mkpuchi ihe mkpuchi poselin na ahịrị nkesa voltaji na mpaghara nkesa n'elu.Emebere ha ka ha nagide ọnọdụ gburugburu ebe obibi ọjọọ dị ka ikuku oké osimiri na ihe kemịkal dị na mpaghara ụlọ ọrụ mmepụta ihe.Ha na-anagide nrụgide okpomọkụ, ike ike na eletriki nke sitere na sekit dị mkpirikpi enwere ike, voltaji na-arụ ọrụ na n'elu voltaji.

  • Suspension type Polymeric Insulator

    Ụdị nkwusioru Polymeric Insulator

    Ụdị:
    13.8 kV / 22.9 kV

    Nchịkọta:
    Ụdị nkwusioru Polymeric Insulators bụ ihe kacha mma.Isi bụ nke fiberglass na Fiberglass Round Rod ụdị ECR na ihe mkpuchi ụlọ na akwa akwa silicone roba na-agbanwe agbanwe.
    A haziri ma rụpụta ha ka etinyere ya dị ka ihe nkwado maka ahịrị ndị dị n'elu, dị mma iji nagide nrụgide sitere na ịdị arọ na ike nke ndị na-eduzi ya na ihe ndị na-emepụta ihe na-eme ka ọ dị mma na-ejide ndị na-eduzi, iji nagide omume nke ifufe na ha na ihe ndị dị na ha. nkwado.Ha na-anagide nrụgide okpomọkụ, ike ike na eletriki site na sekit dị mkpirikpi enwere ike, voltaji na-arụ ọrụ na n'elu voltaji.

  • PIN type Polymeric Insulator

    Ụdị PIN Polymeric Insulator

    Ụdị:
    13.8 kV / 22.9 kV

    Nchịkọta:
    Ụdị ntụtụ Polymeric Insulators na-eji ihe kachasị mma eme ya.Isi bụ nke fiberglass na Fiberglass Round Rod ụdị ECR na ihe mkpuchi ụlọ na akwa akwa silicone roba na-agbanwe agbanwe.
    A haziri ma rụpụta ha ka etinyere ya dị ka ihe nkwado maka ahịrị ndị dị n'elu, dị mma iji nagide nrụgide sitere na ịdị arọ na ike nke ndị na-eduzi ya na ihe ndị na-emepụta ihe na-eme ka ọ dị mma na-ejide ndị na-eduzi, iji nagide omume nke ifufe na ha na ihe ndị dị na ha. nkwado.Ha na-anagide nrụgide okpomọkụ, ike ike na eletriki site na sekit dị mkpirikpi enwere ike, voltaji na-arụ ọrụ na n'elu voltaji.